Like some concrete, it needs to be self loading mixer of Sinochem. The soil contains a certain amount of water. Once the water is less dry, you need to mix slowly in the transportation process. As a common mixing truck component, what should be done to maintain the air system of the mixer?
1. The air compressor of the automatic feeding mixer is placed horizontally and fixed with good ventilation.
2. Can't stand the wind and rain, can't be exposed to the sun.
3. Adjust the upper and lower limits of the air pressure automatic switch. If the pressure is too low, the cylinder will slow down.
4. Check the lubricating oil level of the automatic feeding mixer to keep the oil level between the upper and lower lines of the instrument, and add new oil when the oil level is close to the lower line.
5. Check whether the belt tension is appropriate. When pressing the belt with your fingers, it is recommended that the belt be sagged about 10 mm; when changing the conveyor belt, the whole group should be changed to maintain the same tension.
The air circuit system is also an important part of the automatic feeding agitator. Sufficient oil must be added and maintained to ensure the operation of the agitator. In addition to improving the efficiency of agitator, it can also strengthen the maintenance of air circuit system.
The above is a detailed introduction to the necessity of maintaining the air system of the self loading mixer. To learn more, please click http://www.mag2vow.com