1. 您好,歡迎光臨萊州聚峰機械有限公司官方網站! 鄭重聲明 購機 售后 聚峰官微

            全國咨詢熱線

            400-879-1999

            您的位置: 首頁 > 新聞資訊 > 行業新聞 >
            小型混凝土攪拌車的罐體維修?
            來源:http://www.mag2vow.com/ 日期:2021-06-05
            小型混凝土攪拌車的檢修在整個工程作業中也是重要的,做好基本的檢修我們的工作才能正常進行。首先將砂紙置于ATF油中,浸泡約30分鐘。小心地敲擊閥體,使卡滯的閥桿從閥腔孔中落下。可能有必要使用一把小螺絲刀,將其撬出。
            The maintenance of small concrete mixer is also important in the whole project operation. Only by doing the basic maintenance well can our work be carried out normally. First, soak the sandpaper in ATF oil for about 30 minutes. Carefully tap the valve body to make the stuck stem fall from the valve cavity hole. It may be necessary to pry it out with a small screwdriver.
            然后小型混凝土攪拌車小心不要劃傷閥孔。單向閥桿是否有摩擦痕跡。使用ATF油浸泡過的#600砂紙,打磨閥桿上的毛刺,然后在溶劑中清洗閥桿并用壓縮空氣吹干。卷起半張ATF油浸泡過的#600砂紙,將其插入卡滯閥桿的閥孔中。輕輕扭動砂紙,使砂紙松卷,緊密貼合在閥孔表面,然后邊推拉,邊扭卷砂紙,打磨閥孔。抽出#600砂紙。在溶劑中清洗整個閥體,然后用壓縮空氣吹干。在閥桿表面涂ATF油,然后將其落入閥孔中。閥桿應能靠自重落入閥孔底部。否則,重復步驟,重新測試。如果閥桿仍然卡滯,則更換閥體。
            Then the small concrete mixer truck should be careful not to scratch the valve hole. Check whether there are friction marks on the one-way valve stem. Use # 600 sandpaper soaked in ATF oil to grind the burr on the valve stem, then clean the valve stem in solvent and dry it with compressed air. Roll up half of ? 600 sandpaper soaked in ATF oil and insert it into the valve hole of stuck valve stem. Gently twist the sandpaper to make the sandpaper loose and tightly fit on the surface of the valve hole, and then roll the sandpaper while pushing and pulling to polish the valve hole. Take out the 600 sandpaper. Clean the entire valve body in solvent and blow dry with compressed air. Coat the surface of the valve stem with ATF oil and drop it into the valve bore. The valve stem shall be able to fall into the bottom of valve hole by self weight. Otherwise, repeat step and retest. If the stem is still stuck, replace the valve body.
                        中科自上料攪拌車
            小型混凝土攪拌車用溶劑徹理閥桿和閥體。用壓縮空氣吹干所有零件,然后用ATF油作為潤滑劑,重新組裝。了解了以上的檢修知識,大家可以放心對我們的設備進行檢修,大家在選擇小型水泥攪拌車的時候我們會有人士為大家解答,建議大收工時,要清洗混凝土貯罐及進出料口周圍,保證不粘有水泥及混凝土結塊。
            The valve stem and valve body of small concrete mixer are made of solvent. Dry all parts with compressed air, then reassemble with ATF oil as lubricant. After understanding the above maintenance knowledge, you can rest assured to carry out maintenance on our equipment. When you choose a small cement mixer, we will have someone to answer for you. It is suggested that at the end of the project, you should clean the concrete storage tank and around the inlet and outlet to ensure that there is no cement and concrete caking.
            我們向您承諾:1、設備保修一年,整機終身維護。2、保修期滿后,更換元器件按元件進價進行更換。3、省內維修時間是24小時內維修人員到達維修現場。4、購買本廠小型水泥攪拌車的用戶,可 購買本零配件。
            We promise you: 1. The equipment is guaranteed for one year and the whole machine is maintained for life. 2. After the expiration of the warranty period, replace the components according to the purchase price. 3. The maintenance time in the province is within 24 hours. 4. Users who buy small cement mixer truck of our factory can buy the spare parts.
            感謝您的閱讀,希望以上內容能對您有所幫助,如您想了解更多精彩內容請點擊我們的官網:中科自上料攪拌車http://www.mag2vow.com
            Thank you for reading, hope the above content can help you, if you want to know more wonderful content, please click our official website: Zhongke self loading mixer http://www.mag2vow.com .